Equipotential bonding
Pipe clamps, equipotential bonding bars and earthing busbars for equipotential bonding of external conductive parts and lightning equipotential bonding.
Earthing Pipe Clamps
Earthing pipe clamps for integrating pipes into the protective and functional equipotential bonding according to IEC 60364-4-41/5-54, with continuously adjustable tensioning strap.Product detailsAntenna Earthing
Pipe clamp for lightning equipotential bonding of pipes (e.g. antenna poles) according to IEC/EN 62305-3.
With gradually adjustable tensioning strap, for connecting one or two conductors and suitable for through-wiring.Product detailsLightning Protection Pipe Clamp with Tines
Pipe clamp for the integration of pipes with surface protection into the lightning equipotential bonding according to IEC/EN 62305-3.
For use on surfaces (e.g. varnished or powder-coated) with a coating thickness up to 0.2 mm.
The special tines penetrate the surface protection and provide the necessary contact so that it is not necessary to remove the surface protection.Product detailsLightning Protection Earthing Pipe Clamps
Earthing pipe clamps for integrating pipes into the protective and functional equipotential bonding according to IEC 60364-4-41/60364-5-54 and lightning equipotential bonding according to IEC/EN 62305-3.
The clamping range (specified in mm and inch) refers to the outer diameter according to DIN EN ISO 228-1 of the pipes.Product detailsUNI Saddle Clamp
For integrating mounting systems, e.g. of PV installations, in the functional equipotential bonding / functional earthing (black conductor possible) and lightning equipotential bonding.
The StSt contact plate (intermediate element) allows different conductor materials (Cu, Al, St/tZn and StSt) to be connected to the normal mounting systems, e.g. to aluminium, without the risk of contact corrosion.Product detailsUNI Earthing Clamps
For integrating the mounting systems, e.g. of PV installations in the functional equipotential bonding / functional earthing (black conductor possible) and lightning equipotential bonding.
The StSt contact plate (intermediate element) allows different conductor materials (Cu, Al, St/tZn and StSt ) to be connected to the usual mounting systems, e.g. to aluminium, without the risk of contact corrosion.Product detailsPipe Clamps for Service Entry Masts
For connecting spark gaps with service entry mastsProduct detailsConductor Holders for Service Entry Masts
For fixing round conductors to service entry masts, insulated with clamp bush.Product detailsEarthing Tongs
- For connection to tank vehicles, aircraft, etc.
- For discharging static charge
- For use in hazardous areas
Product detailsEquipotential Bonding Busbars K12 with Snap-on Terminals
Equipotential bonding busbars for protective and functional equipotential bonding according to IEC 60364-4-41/60364-5-54 and lightning equipotential bonding according to IEC/EN 62305-3.- Tested according to DIN VDE 0618-1
- VDE sign
- CE sign
- Fixing frames and plastic cover, grey or black (halogen-free)
- Sealable / labelable cover
- Snap-on terminals, St/gal Zn
- With 12 contact studs
Assignment:
For Rd one contact stud each
For Fl two contact studs eachProduct detailsEquipotential Bonding Busbar MS
For equipotential bonding.
Terminals for:
7 conductors 2.5-25 mm² (solid / stranded).
1 conductor Rd Ø7-10 mm.
1 conductor Fl up to 30 x 3.5 mm or Rd Ø8-10 mm.Product detailsEquipotential Bonding Busbars R15 with Terminal Block System / Kit
Equipotential bonding busbars for protective and functional equipotential bonding according to IEC 60364-4-41/60364-5-54 and lightning equipotential bonding according to IEC/EN 62305-3- Tested according to DIN VDE 0609
- 15 modules
- Grey plastic bar frames and cover (halogen-free)
- Sealable / labelable cover
- Terminal block, St/gal Zn
Product detailsEquipotential Bonding Busbar with Miniature Terminal Block System
Equipotential bonding busbars for protective and functional equipotential bonding according to IEC 60364-4-41/60364-5-54 in small installations.- Tested according to DIN EN 60999-2
- Terminal block, St/gal Zn
Product detailsSingle-Row Earthing Busbars
Earthing busbars for screwing on steel contructions, hole spacing 35 mm.
Connection possibilities:- Flat strip with hole: with M10 flat head screws (with anti-rotation protection), nuts and spring washer
- Round conductor: with KS connector, e.g. Part No. 301 000 / 301 019 or with clamping frame, e.g. Part No. 390 150
Product detailsTwo-Row Earthing Busbars
Earthing busbars for screwing on steel constructions, hole spacing 50 mm.
Connection possibilities:- Flat strip with hole: with hexagon screws M10, nuts and spring washer
- Flat strip (-40 mm) without hole: with clamping plate of disconnecting clamps, e.g. Part No. 454 100
- Round conductor: with KS connector, e.g. Part No. 301 000 / 301 019 or with clamping piece, e.g. Part No. 390 150
Product detailsDownpipe Clamps
Pipe clamps for connecting downpipes to the lightning equipotential bonding according to IEC/EN 62305-3.
Connection possibilities for Rd, e.g. with KS connector (Part No. 301 000) or with clamping piece (Part No. 390 150) (depending on material).Product detailsAccessories for equipotential bonding
Product details
